Rayburn Royal Manuel d'utilisateur télécharger pdf (Page 9)

The burner base plate has a levelling

screw in each corner, make sure that

the plate sits flat on the base of the

cooker.

Push the burner base plate tight up to

rear left hand side of the ashpit base.

Fit Combustion Head with the high

pressureflexi oil pipe fitted and

connect the Air Hose

Fig 17

Fig 18

View from under side of closure plate

Fit Upper Support Plate

Fig 19

The upper support plate is fastened

to the burner base plate by two M5

fasteners.

It is pushed up to the right hand side

of the ash pit and used to support the

pump and control module and also lock

the whole assembly in place.

Fit Fuel Pump

Fig 20

Fit the fuel pump and connect the

flexi oil feed to the solenoid outlet.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Pas de commentaire

Rayburn Royal Manuel d'utilisateur Page 9